This web page was created programmatically, to learn the article in its authentic location you’ll be able to go to the hyperlink bellow:
https://www.digitalcameraworld.com/photography/landscape-photography/you-cant-shoot-long-exposure-waterfalls-in-bright-daylight-unless-you-do-this
and if you wish to take away this text from our website please contact us
When you go to a picturesque waterfall in the midst of the day, there’s a very good probability that there can be numerous gentle about, even sunshine. And that makes capturing a protracted publicity shot of a waterfall a lot trickier than doing it at nightfall. However, don’t let that put you off, you simply want sturdy sufficient impartial density filters and a round polariser. And a tripod clearly, don’t neglect that. So armed, I headed for my nearest babbling brook full with tumbling waterfall.
Settings: 20 secs, f/8, ISO 100, CPL, ND8 filter
What gear I used
Latest Videos FromDigital Camera World
Using the circular polarizer
Bright light creates more distinct reflections on the water so with it being cloudy and the pool at the bottom of the fall being in the shade, there was less of it. However, there was still reflected glare from the waterfall in the pool. The effect of the polariser is to remove the reflections on the surface of the water so you can see through, but it also has a secondary effect in reducing the available light, which was ideal when used in combination with the neutral density filter.
(Image credit: Wendy Evans)
Using a circular polariser
Step by step: Setting the camera up
1 Attach filters
Having found the spot to shoot from the first task is to attach the filter thread for the lens. The filters fit lenses up to 82mm but first you attach the magnetic filter ring that has the same thread as your own lens – 77mm in this case. Then you can simply add the magnetic filters, which snap on. I added the CPL and the ND8.
2 Metering mode
Using centre weighted or zone metering usually makes the water over exposed and even in Raw it’s impossible to get the highlights back. You either need to start dialling in minus exposure compensation, or switch to Highlight Metering, which specifically looks for the bright tones in the image.
3 Remote releases
For a long exposure you want the camera to be nice and still so you can either use a remote release or set the release mode to be delayed. Here i set it to a five second delay after fully depressing the fire button. On a DSLR you can also use the mirror up function to avoid vibrations when shooting.
4 Focussing through glass
On a sunny day, when there is plenty of contrast, focussing is less of a problem, but on an overcast day like this, AF through filters can struggle. In that case, switch to manual focus. I focussed just in front of the waterfall, which was 5m away, as with a 20mm focal length, everything in the shot was then in focus.
Shooting vertically
Composing using gridlines
Look where the rule of thirds gridlines fall. The base of the waterfall is along the bottom third, the start and end points of the final drop are on intersections and the main waterfall is down the left side vertical.
Before you go…
To shoot long exposure shots at waterfalls you’ll need a filter system like the NiSi JetMag Pro system, as well as a decent tripod and a wide angle lens.
This page was created programmatically, to read the article in its original location you can go to the link bellow:
https://www.digitalcameraworld.com/photography/landscape-photography/you-cant-shoot-long-exposure-waterfalls-in-bright-daylight-unless-you-do-this
and if you wish to take away this text from our website please contact us
